TEC-AC410LE is a 4 channel energy management controller with a maximum load per channel of 10A. Build in TEC-net protocol, The TEC-AC410LE can be configured with smart control panels (Touch Screen) and DMX512 Lighting Control Managed Software, it can provide maximum 256 preset scenes for entry, set-up, cleaning and presentations.
Technical Data Model No.:TEC-AC410LE Supply voltage/ working voltage: AC220V, 50/60Hz single phase at 40A Maximum Load: 10Aper channel Load Types: Incandescent Lamps Low voltage electronic transformers Neon / Cold-cathode Fade Times: 0-60 minutes Memory: EEprom for 256 scenes memory Resolution: 256 grades continually dimming process Emergency protection: Failure to "ON" safety feature Failure protection: 4 x Manual bypass switches Construction: Wall mounted steel case Dimension: 300(H) x243(W) x83(D)mm Working temperature: 0'Cto 40'C Weight: 4kg
FEATURES: Four dimmable channels rated at 10Amp output 10A MCB protected for each channels Most types of Incandescent, low voltage lamp and inductive loads 256 grades continually dimming process Four Manual bypass switches Lightning protection Failure to "ON" safety feature Distributed network Up to 65,536 channels and 256 Area per network. Channel Addressable. Every Channel could be assign to any area individually. Dual addressing mode manages physical address and logical address. Scenes preset, area setup, unite, partition flexibly online with DMX512 Lighting Management software. EEprom memory, to prevent memory loss after power failure RS485 TEC-NET serial port DMX512 compatible 256 scenes memory Diagnostic LED
SKP.cn
Copyright 2012Guangzhou
SKP Digital Electronics Co., Ltd |